Inferno MP9e
The latest version of the legend of off-road racing, the Inferno series, is now available as a race-ready, full-blown competition electric version!  The MP9e represents the most advanced electric powered buggy with performance that not only challenges nitro-powered machines; its often superior in many cases. | |  The low center of gravity of the MP9 with weight and mass further concentrated along the centerline, results in even better performance than is possible in the nitro version. | |  The quality of the drive components and the precision of the premium ball bearings used throughout result in the smoothest, most efficient drivetrain available. Also, a uniquely designed motor mount allows gear mesh to be precisely adjusted, or the motor to be removed, by loosening just two screws from above. There’s no need to loosen or remove any screws from the bottom of the chassis. |
 Machined 7075S aluminum shock stays feature a durable black anodized hard coating, which promises strong and consistent performance. Newer and better performing medium-size shocks are standard equipment for the rear of the MP9e. Newly designed body developed specifically for the MP9e improves aerodynamics for greater controllability, increases cooling airflow for the motor and ESC. Although it’s developed for the MP9e, this stylish new body is also compatible with the GP version MP9. | |  Equipped with black-anodized aluminum knuckle arms and suspension mounts. The extra-durable suspension mounts are optional for other versions of the MP9, but standard in the MP9e. | |  Universal swing shafts drive all wheels as well as the front and rear differentials for ultra reliable and efficient drive performance. High-spec hex bolts are also used throughout. |
 Hard main chassis features rigid black finish and all of the openings are sealed to create a completely flat bottom surface, helping the MP9e glide over obstacles and to prevent debris from collecting above the chassis. | |  Mud guards first seen on the rear suspension arms of the MP9 are also standard for the MP9e, which prevent dirt contaminating the drive shafts and wheels. Neon orange color resin material is used for the suspension bushings, which features high visibility and allows for easy identification of their orientation during installation or removal, not to mention the unique and stylish appearance. | |  Includes stylish fluorescent orange colored suspension bushings. New color can be easily recognized or found when in cases of detachment. Available |
- Low center of gravity 3-differential full-time 4WD shaft drive with 4-wheel independent suspension.
- Full set of precision, high-spec ball bearings.
- Compatible with wide variety of optional parts.
- Fine tune for optimal race settings with adjustments to wheelbase, tread, roll center, caster angle, toe angle and camber.
- Front hub carrier features 3 different caster settings.
- Roll center can be adjusted on the upper AND lower suspension arms.
- Bolted rear wing holds firm, even under severe shocks.
- Lightweight design with compact front and rear differential units produce one of the lightest electric models in its class.
- Hinge pins are captured using capped bushings instead of E-rings to minimize the steps required for maintenance or suspension adjustment.
 |  ＜ ReadySet Contents ＞ - Chassis
- 1 Module Steel Pinion Gear
- Clear MP9e Body
- Decals
- Hex Wrench
- Cross Wrench
- 17mm Wheel Wrench
|
| ＜ Required for operation ＞ - 2-channel, 1-servo R/C System for cars
- BL ESC (Brushless Speed Control)
- BL 1/8th Scale Motor (Brushless Motor)
- 6cell NiMh / 2s or 3s Lipo Battery Pack : Part #: PEK00530 (Li-Po Power 5400 45c (7.4v/Deans Plug)) Part #: PEK00544 (Powerflo Lipo 4000 30c (7.4v/Deans Plug) ) Part #: PEK00545 (Powerflo Lipo 5000 30c (7.4v/Deans Plug) ) Part #: PEK00546 (Powerflo Lipo 3500 30c (7.4v/Deans Plug) )
- Battery Charger NiMh or Lipo
- Batteries for transmitter
- Wheels & Tires
- Shock Oil
- Paint
- Glue
|
Length
| 490mm | Width
| 307mm | Height
| 180mm | Ground Clearance
| 28mm | Wheelbase
| 325mm(4 settings available by adjusting the rear hub collar.) | Tread (F/R)
| 254mm (3 settings for the rear and 2 settings for the front by changing the bushings.) | Tire(F/R)
| sold separately | Gear Ratio
| 12.6：1 | Weight
| 3,370g（with 4000 Li-Po） |
|
Όλες οι αποστολές εμπορευμάτων εκτελούνται με τα Ελληνικά Ταχυδρομεία και την εταιρεία ταχυμεταφορων Speedex (Courier) στις καλύτερες τιμές που μπορέσαμε και εξασφαλίσαμε για τους πελάτες μας.Τα έξοδα αποστολής συνυπολογίζονται αυτόματα κατά την προσθήκη των προϊόντων στο καλάθι αγοράς και οι πελάτες απλά επιλέγουν την μεταφορική εταιρεία που επιθυμούν. Επιλεγμένα Προϊόντα
Kyosho DBX Racing Buggy GXR18 RTR
Τιμή : 270.00 €Τιμή Προσφοράς: 249.00 €
|
Περιεχόμενο καλαθιού 
